You are not currently logged in. If you do not have a user account then please consider creating one and logging in before you post your comment. This will allow you to track replies to your comment, and take part in the site much more freely.

To add your comment, fill in all the boxes below and then preview it to make sure you're happy with the way that it looks.

This is the comment you were replying to, attached to the article Software RAID5 and LVM with the Etch Installer:

#3 Re: Software RAID5 and LVM with the Etch Installer Posted by Anonymous (68.185.xx.xx) on Thu 22 Mar 2007 at 15:40 One of the problems I have had in the past with software RAID is if the system looses power (UPS fails, which has recently happened) and the system shuts down. I am using Dell 2400 servers with RAID 1 and 5. RAID went together fine, but when system lost power, I was unable to recover and was unable to boot into the system. I am new to Linux and really like the speed and usability of the sw RAID. So, how does one ensure that the system will be able to boot normally when something like the above happens? Currently, my only solution (which has been working) is to run with hw raid (same configuration).

Username:	Anonymous
Title:
Your Comment:
Posting Format:	BBCode HTML Text Plain Text Textile

Inappropriate comments will be removed.

Username:

Password:

[ Advanced Login ]

Register Account